2N EASYGATE MODEM DRIVER

Page 8 Product Description 1. We are always pleased to offer 2N products to our customers, because we value the high functionality, performance and reliability of 2N equipment. The GSM gateway can keep you informed via SMS about an outage main power, its coming on again, and the status of the backup batteries. Click on the programming table icon on the left-hand side. The antenna should be mounted vertically. When this wizard is not available, you have to use manual setting according following instructions. The table can contain up to 20 different prefixes.

Uploader: Akinocage
Date Added: 5 November 2018
File Size: 62.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 61792
Price: Free* [*Free Regsitration Required]

Set phone connection in your PC using Network. The table can contain up to 20 different prefixes.

2N® EasyGate

GSM connection is reserved for the whole time of connection and calls are. SMS Sending Input 4.

Having done so, you can hear the refusal tone and can enter a new parameter number. Telephone line connection 2.

The Extra tariff parameter defines transmitting of fixed quantity of tariff pulses after call start. The electromagnet is fixed on the frame and against the plate on the door leaf or the. Here is what you can find in this section: Call forwarding unconditional If activated, incoming calls will be always forwarded to the configured telephone number.

  FM801 AU PCI AUDIO DEVICE DRIVER

The fax communication easyfate must be registered with your GSM operator. Line interface Interface type: The antenna should be mounted vertically. Run the PCManager and select the language for displaying texts on the righthand side.

If there is the other incoming call during connected call it will be indicated by tone. Supplementary Information This section describes supplementary information of the product. Description of field codes: The serial port for GPRS connection enables communication by e-mail, browsing the Internet and receiving faxes.

2N® EasyGate – GSM/UMTS Gateway – 2N

The CSD mode can provide data connection. Page 21 Telephone line connection 2. This parameter sets minimal call cost. Page 48 Voice function 4. We are always pleased to offer 2N products to our customers, because we mocem the high functionality, performance and reliability of 2N equipment.

By activating this input electric input pin interconnection you send one SMS to one pre-programmed telephone number.

2N EasyGate Analog GSM Gateway developed (1*GSM)

Page 30 Table of Parameters 3. The Tariff parameter sets the call cost according to call duration. The interface the link 2N Mosem serves not only to save costs but also to offer other possibilities for communication, for example, send and receive SMS and fax messages, thanks to GPRS you. Load data from EasyGate — if EasyGate is not in its special programming mode, you are invited to switch EasyGate off and on again. Table of Parameters 3. Set the connection parameters.

  KYOCERA 5551 DRIVER DOWNLOAD

In addition, this gateway serves as a easyvate fixed line replacement and even lets you save on calls to mobile networks. Click on the programming table icon on the left-hand side. Register for Technical Training View our technical training courses. GSM connection is reserved for the whole time of connection and calls are charged according to the connection easygat. The connector is equipped with screwing clamps to connect wires leading to a switching contact device to be monitored.

These serve to determine the call pricing or duration of an attached device.